Cómo Hacer un Retablo de Santa Claus Paso a Paso

Cómo Hacer un Retablo de Santa Claus Paso a Paso


Hello Art Friends in Your Hands
Welcome to a new project for today let’s share how to make this
altarpiece is a santa claus about two years ago
we share a snowman and for this year, we wanted to share the
Santa Claus who had suggested so much to us so we hope you like it
put into practice remember to subscribe there on the red button, activate the
bell to get all of you our notifications and also
remember that the molds of all projects that we share
they have no is not found in the blog in the page on facebook Arte en Tus Manos
with Lili and Sam, then join me in all the step by step so that they learn to
make it welcome! good and for this project these are the
most of the materials that we need is the altarpiece that I’m going to
use 9 millimeters thick it can also be cartoon remember that
I have told them in other occasions also It can be a cardboard that is thick
fabrics is felt I have two types of stuffed animal that is long hair with
we’re going to do the beards this is the plush mink, there is the fabric for the part
which is skin color that is the face it is mainly called angel skin
peach skin, yersilon also les It serves liquefied flannel of the color that
you wish so normally in which calls us skin you decide, in the
description the same list of materials we leave them complete then so
can you have an idea of ​​what we are going to use brushes scissors glue
white liquid silicone and also hot buttons pompoms a close or
Zipper to hang cord too golden wadding that is what to quilt
normally the quilts in the wadding silicone cotton then with these
materials we start if one is missing remember that
here in the description in the part we leave the list of materials and
also the link so they can download the molds
well here I already have the altarpiece if this is the mold that we are going to share with you this
altarpiece has a length of 64 centimeters and the lower part that is
that of the feet the widest part say so the body measures 41.5 you what
can accommodate if you want I had more small bigger that’s decision
then from each one here then already they see the mold that the altarpiece and this same
mold we’re going to cut the batting the Wadding is the same as they use when
they are listening to the quilts the sheets that are so cute this is
of the same material she comes from various calibers
this is one that is thick that measures about two centimeters of this
you can not also open it in the center and we are thinner that also you
they decide if they want it thicker or thinner but so thick gives us a
more cushioned feeling prettier more puffed then this
It is also going to cut exactly the same the size of the altarpiece what we do
now it is to stick it with silicone or with White glue good now considering the size
of the head we are going to create the piece that will shape the face here I can not
cut to the margin of the wood because I need to cover the wadding
then approximately let’s take a measure that takes us about 3
centimeters that we know that when we cover
is going to cover the wadding then here what I’m taking from the back
but this is what we are going to put here to cover it then I’m going to cut it
same, I am going to share with you the mold to make them well done here
is so that if they are going to be smaller know how to get the mold out of your head
in the same way I also take the dressed then about three
centimeters same to the other side short the fabrics there is also a benefit
when we started to stick the fabrics in the back then the remainder
we can remove them to the excess also can cut by now then we go
taking the measure of the dress and we do the same to get the measure of the
shoes and these are the pieces then that
conform the body of the saint that are the head the body as such the shoes and
I have also cut four pieces for that make up the arms and four pieces
for what make up the gloves if all of them at least the molds of
what is the head the gloves the arms all of them are shared and what
that make up the shoes and the dress that we do give you the exact measurements for
that can take it out then we’re going to start to arm
well here then let’s start with the head I will put the cloth on the table
and I go to flip the piece
for paste here I put pressure on the fabric and I start to bring it to the wood and
I’m sticking with hot silicone the excess fabric can be cut already
final and so it remains to give an idea of
how is it then lined up the the face of the saint
we do the same process with the body So the body is left then covered
the dress the red part and now we do the same process the same as we have
done but with the shoes we give back again and we locate where
the shoes would be ready we do the same
the same process remember that you have to Apply enough silicone and also
do a little pressure to be able to the altarpiece is well puffed well here then we gave it back
that the shoes are well-armed on top
then we had a leftover we’re going to flip it over
about one centimeter and we will also hit it if they want
Sew it up they can do it but the truth is apart you will not see you do not notice if
we met and if I get it we paste here now now I’m going to take a step so that
let us be focused on a division that I’m going to do between each shoe so that we
is the way we wanted shoes then the measure that goes is 42
centimeters in the middle would be 21 so what I’m going to do is with
pins to help to look at the measure so that
we stayed focused we stayed pretty it’s just a guide and we’re going to start introducing then
the needle we introduce by the low part and let’s do it is linear stitch but continue that we will remain continuous
so that the same fabric with the wadding leave as if remembering that the
pins only is a guide point so we are going to do it until the part
superior then here we are going to take a measure approximately in about 5
centimeters I’m going to look at exactly how much of 8 out of 8
centimeters and we’re also going to do the same sign to the top is this
part of the dress to this part in actually the lower that part of the
dress so that we stay like legs but here if it would be in red
I will continue to do we’re finished if you want you can review
the sewing here I bring you to see that suddenly if you get to notice a
little but already when you do not see it that way in person if you notice the division that there
between the two between the two sides now I’m going to make stuffed mink rolls
these rolls are going to have 8 centimeters wide and long if they are going to have 37
centimeters I’m going to make one for several pieces for the suit for the boots and
for gloves, what I do is double a little and here is a roughly 8 calculation
centimeters can be cut and have them ready and with hot silicone
then I start to stick them and so the I’m putting together who likes to sew things and not
there is a problem I’m also giving him agility and what
another is that there are many subscribers that the truth in the comments tell us
that they do not like to sew a lot it makes it difficult for those who do not
I like to sew it easier make of these for now I’m going to do 4
Well, here I have one of the pieces of stuffed animal that will be located in the
center where we made the sewing to live the legs then there starts this
stuffed toy I’m going to stick it to the where the dress meets the
head because we also help each other with silicone we are going to stick it and there
all this we are going to hit Apply it directly on the stuffed animal or
we stick it on the dress as I eat We want to locate it so that it does not
I stayed right to the piece so now we cut the excess
when it is already well stuck we can give silicone retouching in the parts where
We are missing so we can stay well and here I will locate another piece and remember that I told you here that they will leave
8 centimeters is because in this part there is stuffed then this here
get dressed and here is the shape of the trousers
here also apply quite a lot silicone and paste the piece and then then we paste on the part of
back as we did with the other fabrics well here I also put him in the neck
so that we look good here in the low part of the boots then I put him
aside in this extreme here I’m going to do what I did was to paste a
little silicone this stuffed animal tends to like
fray how to fray then that’s why I always work with
silicone or I stick it like that because it tends to get damaged
here he doubled it I’m going to be finished is going to be
well composer then look here you do not notice
so now I can take I’m not going to put here and I’m going to
paste I did the two parts was so that we will be divided the two boots
then the effect is that it is in the leg and that this is the foot or boot
internal will be more accentuated putting the two pieces of stuffed animal
the boots separately remind you that here you do a fold that cross here
and from here I start to stick it and I do the same process and here I stuck it
to teach and I hit him we give him the back and finished it here in the
back then the same thing I’m doing here
with scarcely of sylicon no but
remember to make the silicone touch-ups if they play if they are missing when there is already a
bit drier is done here it bent towards back and now I also stick it
I will start then to sew what make up the arm
and the glove of our saint then here is the sleeve I’m going to do sewing
in festoon stitch remember that stitch has several names tell you
because it’s all around the doll buttonhole stitch, dragon already has many
names and gives us a very handmade touch I’m going to sew the project and I do the same stitching all over the
contour of the curve in the glove and we thought the same as we did with the
arm A) Yes well then now we have both
pieces that make up the arm and the glove let’s put them together here I have what
I held with some pins then let’s start to know in the same
stitch in the stitch stitch but she will get to the moment in
one of the sides then in this or in the other than equality the same thing we’re going to leave
a space to fill in then we are going to sew like this is going to start here this part does not matter what the
because here is going to go a piece of stuffed animal and as well as how can the
rest of the dress then here we go to start to perform this tip and when
we already have all the return and we arrive soon here to this other side then
we leave the space we fill and seal here I go to sewing as I told you
they say all around and here I left the hole then now I’m going to start
introduce the silicone cotton I finished filling it now as I did
I had not removed the needle I still then sewing and for
seal good here to each of the arms
then I’ll hit the stuffed animal equal to as I did with the whole dress and
boots and so I put him then now what what I’m going to do is apply silicone here
at the ends where the arms start and we stick it to the body and they put it where prettier
1 remember that you have to hold up well the pieces to stick
and stay fixed already the arms were already dry
totally then we will begin to work your head
good to start then do the face let’s cut a circle
7.5 centimeters in diameter and we’re going to darn it, if they want the bigger nose because this piece of make for the nose
then they cut the circumference more big and if they want it smaller then
then smaller everything goes in tastes
So here I am doing a darning well, that’s how my nose was like, so here I am going
to locate but before hitting the nose what what I’m going to do is that I’m going to paint
eyes you decide if you put the eyes that normally sell in the
market or apply techniques that I have already taught in others step by step that they
teaches painting, embroidery, crazy eyes I used all the techniques in
the videos for you to apply the that they like or that they are most
facilitate in this I will show how I’m going to paint but in a step by step more
fast because already in others I have explained a little more detailed then
I’m going to start with the color white now we will apply the color black it has completely dried the paint
then now let’s make an effect in the part that we painted in blue
let’s make some lines to give as an effect to give it light
are very thin lines already in a video that I shared recently
to show how the little eyes then from here I return it
I explain but then the techniques and I’m teaching them more in quick camera
pure lines that are dim, it does not have to be very
repainted can be only in the blue part and we apply a
little more from the center and the center towards the end of each eye for example from
this would be the right side and that’s what does the left side then what
we do blank and in black when you have finished making the effect
of this dry brush that shading those lines in black and white we begin to
delineate we are going to apply in a brush that is
very thin and we started to delineate give him
enhance the look let’s now work the beards
so here is the mold so we are also going to share them and these
already are the beards cut here I have done a brand where I want it to be
the beard is stuck, the beards I leave to disposition of you in this stuffed animal
of long hair or in the technique that teach in the previous video that are the
beards in wool then you already they choose which one they like best and several
I have taught them to choose the one more like it because this beard I’m going to
put the cloth to the right on the face and what I’m going to do is start hitting
with silicone if in this position to that the beards who stuck to the face
then I will start apply the silicone and remember that you have to focus
and accommodate and I start to stick the silicone all over
the outline where I want the one who hits the beards I already hold, I hope it dries and then
hit the excesses up so that the beard comes from the part of the
head we wait for it to dry well well here it’s dry then
we started to fix the piece and look at the effect it gives us
Yes go is with him with the little hair
like from the head I already have list the whiskers as the whiskers the
I will stick in this position you they can also with the scissors cut the
excess stuffed what you do not like if you can remove it then here I go to
stick the whiskers all right that the cleared part starts to paste
the whiskers if you notice when you cut the stuffed animal
cut how comes the next giving him the sense that they would have whiskers like that
whiskers and beards go down then you always have to accommodate the
fabrics to give us the position and here I have my nose remember that I made it
so here I am going to stick my nose also applied good enough silicone and we stick it we hold these pieces well for
that hit us and you know that for example the mustache if it was not
very well cut does not look very good on stuffed toy we can cut is here so
less until the space where it is supposed that go the lips but the amount of
stuffed toy gives us to look good cute then we accommodate the excess what
We cut to make it look nice and we continue with the hat
now let’s work on the hat is a piece that cuts the base has double
If the base is double, it is 18.5. actually the base in total is the average
for the mold it would be 37 centimeters and long if in this part of the hat is
of 42 centimeters then instead of make a straight hat
right triangle what are we going to do it it’s with a little curve that’s what
that allows the hat to look nice then in this curve we are going to do the
Same stitch we made in the arms that the stitch stitch, then
let’s do it for all that contour and in the lower part we will decorate the same
how do we do the whole project with the stuffed mink, then like that to end here at the end good before hitting the hat then
cut a piece of cloth you can buy this is called kambral the fabric
surgical that already comes from many colors buy that cloth and what I’m going to
do is cut it the same size as mold and with it cover the
imperfections of work that we have done then here is going to hit
also with hot silicone and that we will prevent all of us from seeing each other
work that was done if everything is stuck and they give us the best
presentation of what we do and then when we paste the kambral then there
if we proceed to paste the hat well then after having
glued look how it is now taught them
well in a photo after having stuck so now we are going to put on the hat let’s accommodate we paste it if we can higher what
we stick in the back what We also arrange and fix the hat as we like well here I already place the hat now
taught how it was and here what I’m going to do is I’m going to locate the zipper
which is the system that we are going to use so that we hang on the wall or where
we wish that this altarpiece then here I place the zipper as centered as
can screw and here with these screws in
the lower part as you can see I put a of the same material that I used as a
support system you can put a pillow or whatever they need the fact is
that we are not going to make much force to the wood and making it this system
let’s not go to leave here is what we do is that we are putting the
screws each with its ability if suddenly they do not know how to place them or
It costs difficulty, we ask you to help soon some gentleman who is at home
to help us, this is what I put well after making the system
fit where we are going to hang this altarpiece then I put some laces and in this
part of the shoes and if we go up a little bit more then well also the
buttons that you put on the dress are the golden buttons that make it
receive much more the color of the dress That is how the saint, the
altarpiece of santa claus, of santa claus in this video, I hope you like it
put it into practice the truth is a step by step very simple the result is
very nice at least I liked it a lot, I hope to read many comments
also of you if you liked it if they go to put into practice there is always some
material that has another name in another country they let us know so that they can
let’s teach all the names of the materials remember that molds
we share on the blog and on the page in facebook Art in Your Hands with Lili and Sam, if there in the description they we leave the link,
list of materials now I’m going to take some pictures to see how they are
complete plan and I hope you give us a present I like that they share the video that
subscribe there on the red button if they still have not done it and we read
also all your comments then a hug for all and see you in a
next video here on your channel Art in Your Hands do not ah Y

62 thoughts on “Cómo Hacer un Retablo de Santa Claus Paso a Paso

  1. Buenas noches gracias por compartir su valioso tiempo enseñándonos tantas maravillas que preciosidad gracias por compartir y enseñarnos que dios los bendiga y les siga dando mucha semejanza y sabiduría muchos abrazos Muchas vendíciones clara de Colombia ??❤?

  2. Buenas noches Lili
    Esta súper hermoso
    Gracias por tomarte tu valioso tiempo de compartir estas maravillas
    Mil y Mil Bendiciones
    Los adoro,

  3. Que lindo, felicitaciones lili y sam gracias por compartir, una duda sino hay la posibilidad de la madera para que la figura quede bien, que tipo de carton se puede para que se sostenga y tenga la firmesa nuevamente gracias

  4. Está hermoso,el año pasado a mis nietos les hice los frascos con santa y les puse dulces,hice cinco,me quedaron muy bonito,ahora quiero hacerles este retablo de santa ,me encantó ,gracias x compartir

  5. Buenos tardes, gusto saludarlos,q lindo todo lo q comparten todo muy explicadito,q Dios les bendiga su talento para q nos sigan mostrando todo lo q comparten gracias y mis bendiciones siempre ??

  6. Hola amigos como estan, hermosos muñecos los felicito, un favor si podrían hacer una iglesia en carton y paño lenci, gracias un abrazo a la distancia. ??

  7. hola buenas tardes como estan espero que muy bien les pregunto en que parte esta el molde del retablo del papa noel que no lo encuentro en los moldes mil gracias mil bendiciones y una feliz navidad y un prospero año nuevo un abrazo gigante desde medellin

  8. Gracias por compartir está hermoso ese reptaba que Dios los bendiga a los dos desde Monterrey Nuevo León y así les voy a estar poniendo gorro cada que vea un tutorial de ustedes gracias

  9. que hermoso es todo lo que uds enseñan los felicito mi nombre es Carla Rodriguez como quisiera conseguir la molderia llamenme o mandenme mm al 3178496603

  10. Me encanta q enseñas paso a paso. Muy bello, no hiciste a la esposa de papá noel. Gracias, bendiciones ♥️ ?

  11. Hola;como están son una linda pareja que nos enseñan cosas tan lindas, le puedo pedir el grande favor de si nos puede enseñar unos muñecos para recoger las cortinas si tiene los moldes gracias que Dios la bendiga

  12. Hola Lili y Sam este video es el que esperaba también y se me pasó, hasta ahorita lo voy viendo. Está hermoso como siempre todo lo que realizan, quiero pedirles que si pueden realizar un reno y una galleta de jengibre en retablo por favor? que Dios y la virgen los bendigan siempre. Saludos y un abrazo desde México ???⛄????☸️

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated